4/30/2023 0 Comments Use two screens for macSelect “Tile Window to Left/Right of Screen” to trigger Split View. So back went the Cablematters dock.To access Split View, hover your mouse over the green “Full Screen” button at the top of a window until you see three options show up. Just in case this was a BenQ issue, I tried a Samsung 28″ 4K DP 1.4 monitor (LS28AG700NNXZA), and that was even worse! Again, the second monitor output was black but when I pulled the DP cable out from the Cablematters dock macOS Monterey instantly crashed and rebooted. But getting dual DP 1.4 monitors at the same time proved to be impossible. Also, an old 1080P Dell worked via DP on the second DP port as well. I could get the second BenQ working via HDMI, which was odd. In the macOS display app the second monitor would appear then disappear every few seconds in an endless cycle. Again, one BenQ would work just fine via DisplayPort, however the second BenQ (via DP), was non-functional. However, the symptoms here were a tad different. However, this also failed me and didn’t work with my M1 Pro (although it worked flawlessly with my Intel Mac). Dual DisplayPort v1.4 (and HDMI) outputs, USB-A, LAN, 96w PD, etc. While MacOS would recognize the second BenQ monitor, the actual monitor had no output…was just black.Īfter that failure, I ordered a Cablematters 14-in-1 Hybrid dock. With the WL-UTD23, only one DisplayPort was fully functional. I fully expected a plug-and-play experience with my M1 Pro Mac. This dock had it all built in…dual DP outputs, USB-A ports, LAN, etc. With my previous 13.3″ Intel Mac, I had long used a Wavlink WL-UTD23. The combination has been wonderful, and even through several sleep/wake cycles the monitors and USB ports come instantly to life.Īs I have previously covered, I wanted to connect my BenQ monitors via DisplayPort v1.4 and not HDMI. Winner winner chicken dinner.Īfter numerous previous failures, when I connected the Satechi dock and plugged the OWC dongle into the dock I instantly had glorious dual 4K/60 output that was rock solid! Mission accomplished. This Thunderbolt 3 dongle supports dual DisplayPort v1.4 outputs, 8K and 4K resolution, and is physically very small. After several failures (covered later), I stumbled upon the $78 OWC TB3ADP2DPT. Now that I got a dock that I really like, it was time to research DisplayPort dongles. Also, for Mac users the NIC drivers come with macOS, so there’s no need to install third party drivers to get network connectivity. And after using it for a few days, it only runs slightly warm to the touch unlike other docks that can be little ovens. And to me it’s visually appealing, unlike some other more utilitarian docks on the market. The dock feels very well made, and has a great micro-textured finish. And they come in space grey, which matches the Apple space grey very well. I have a number of other Satechi products, and I’ve always been very happy with them. This Thunderbolt 4 dock has the following ports:ġx Front USB-A 2.0 port (supports charging)ġx Front 3.5mm headphone/microphone combo portġx Front host Thunderbolt 4 host port with 96w PDĪs you can see, it has all the ports I wanted except video outputs. It’s model ST-UCT4DM and retails for $299 but is on sale for Black Friday for $249.99. It’s so new, it’s not on Satechi’s own website, but is in stock and sold through through Best Buy. Thankfully, Satechi just brought to market a Thunderbolt 4 dock that met nearly all of my requirements, minus video outputs. I did extensive research, and the number of options was quite limited. As previously mentioned, ultimately I wanted a solution using ThunderBolt 3 or 4 to provide 96w PD charging, at least 3 USB-A ports, LAN port, and dual DisplayPort v1.4 outputs for my monitors. The end of this article will cover all the docks and dongles that didn’t work for me, but here I’ll cover what I finally picked and has been rock solid. I’d like to see at least 2x USB-C and drop one USB-A. My only nitpick is the over abundance of USB-A and only one USB-C. See detailed spec sheet here for video support. Supports dual 4K/60Hz on Mac, and up to 4x on Windows. That issue is not present on the Plugable dock.Ģ.5G NIC (Realtek RTL8156B PnP with MacOS Ventura, WoL, jumbo frames) So I’d have to manually re-arrange them in the Ventura settings app. The only issue I had with the Satachi dock and the OWC DP dongle was that whenever I docked my laptop, macOS would flip the side-by-side position of my dual BenQ monitors. For me, it has the perfect set of features and is now my new dock for my 14″ M1 Pro. January 2023 Update: Plugable just released their TBT4-UDZ Thunderbolt 4 dock.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |